DFI began manufacturing a compact ventilator. The most small computer from the DFI and one of the most compact models on the market, EC90A uses the 15-watt AMD Ryzen R1000 series processor. These processors belong to the embedded class and for their cooling is enough of the radiator, which is the computer housing. To EC90A, you can connect two HDMI monitors, and the Radeon VEGA 3 graphics controller built into the processor supports video playback of Full HD. The manufacturer's company sees EC90A as a platform for creating a building automation systems for installation in information kiosks and slot machines, as well as an inexpensive and compact content-player for retail and services.

The computer case is made of aluminum and steel parts. The compact housing, its dimensions are 112 x 80 x 56mm, and in general it will require a volume of less than one liter. The entire housing works as a processor cooling radiator and motherboard. On the system board, depending on the modification, the R1606G, R1505G, R1305G and R1102G processors will be installed. The processor uses the DDR4-2400 RAM, which will be chopped directly on the motherboard. All models have 4 GB memory. As a disk drive, the computer uses an EMMC with a volume of 32 or 64 GB (EMMC is also displeasted in the manufacture of the board). Despite the miniature design, the computer allows you to install the MINI PCIE expansion fee. Part of the modifications will be produced with two RS-232 serial ports, the rest are equipped with an 8-bit GPIO. One of the modifications received the LTE network adapter.

On the surface of the computer housing are available: 1 USB bus jack 3.1, 2 HDMI video output, Copper port Gigabit Ethernet. Also, the housing is installed connectors of the input and discrete interface (or 2 x RS-232).

The computer connects to a 12 volt direct current source.

Computer modifications EC90A:

Specifications EC90A-GH (750-EC90A1-000G):

#dfi # compact computer # embedded computer # embedded #amd # computer iron